RU-NFD

The RU-NFD modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations. The RU-NFD is an RDL Format-A sender/distributor that connects to a Dante-enabled network. It converts three Dante audio channels to RDL Format-A. Each network channel corresponds to Pair A, B or C of the Format-A outputs. The unit converts a fourth Dante audio channel to a balanced line-level AUX output.

• Digital Audio Ethernet Protocol:Dante
• Transmission Rate: 100 Mbps
• Sample Rates Supported:44.1 kHz, 48 kHz (default)
• Bit Depth Supported:24 bits
• Audio Operating Levels:-18 dBFS = +4 dBu
• Format-A OutputsRDL Format-A RJ45 (3)
• Format-A Signal Pairs Used (3):A, B, C (each Format-A output)
• Frequency Response:20 Hz to 20 kHz (± 0.75 dB)
• THD+N: 18 dB
• AUX Output
• Output:Balanced, detachable terminal block
• Output Level:+4 dBu (nominal)
• Output Impedance:150 O balanced; 75 O unbalanced
• Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
• THD+N: 18 dB
• Indicators (12):Power In (1); Power Out (3); Audio Signal LEDs (4), Network Sys and Sync (2), Ethernet Link and Speed (2)
• Power Connections (2):Power Jack; Detachable Terminal Block
• Ambient Operating Environment:0° C to 40° C
• Power Requirement:24 Vdc @ 120 mA plus connected loads.
• Dimensions:5.8" x 1.7" x 5.2"
• Weight:1.345 lbs.