RU-FNP

The RU-FNP modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations. The RU-FNP is an RDL Format-A receiver that connects to a Dante-enabled network. It converts the three Format-A audio pairs to Dante networked digital audio channels. Each network channel corresponds to Pair A, B or C of the Format-A input. The unit converts a fourth input, balanced or unbalanced line-level AUX, to Dante.

• Digital Audio Ethernet Protocol:Dante
• Transmission Rate:100 Mbps
• Sample Rates Supported:44.1 kHz, 48 kHz (default)
• Bit Depth Supported:24 bits
• Audio Operating Levels:-18 dBFS = +4 dBu
• Format-A Input:RDL Format-A RJ45
• Format-A Signal Pairs Used (3):A, B, C
• Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
• THD+N: 90 dB (50 Hz to 120 Hz, any input pair)
• Crosstalk: 18 dB
• AUX Input
• Input:Balanced, detachable terminal block
• Input Impedance:<gt/> 20 kO
• Input Level for +4 dBu:-16 dBu to +12 dBu, +22 dBu maximum
• Frequency Response:20 Hz to 20 kHz (± 0.75 dB)
• THD+N: 60 dB (50 Hz to 120 Hz)
• Crosstalk: 18 dB
• Indicators (11):Power In (1); Power Out (1); Audio Signal LEDs (3), AUX Dual-LED VU Meter (2), Network Sys and Sync (2), Ethernet Link and Speed (2)
• Power Connections (2):Power Jack; Detachable Terminal Block
• Ambient Operating Environment:0° C to 40° C
• Power Requirement:24 Vdc @ 100 mA plus connected loads, or PoE
• Dimensions:5.8" x 1.7" x 5.2"
• Weight:1.35 lbs.