TNY264GN-TL

TinySwitch™-II enhanced, energy efficient, low power off-line switcher integrates a 700V power MOSFET, oscillator, high voltage switched current source, current limit and thermal shutdown circuitry onto a monolithic device. The start-up and operating power are derived directly from the voltage on DRAIN pin, eliminating the need for a bias winding and associated circuitry. In addition, the TinySwitch-II devices incorporate auto-restart, line undervoltage sense, and frequency jittering. An innovative design minimizes audio frequency components in the simple ON/OFF control scheme to practically eliminate audible noise with standard taped/varnished transformer construction. High voltage powered-ideal for charger applications. Built-in current limit and thermal protection improves safety and ideal for cell-phone charger and PC standby applications. Simple design practically eliminates rework in manufacturing.

• 5.5W (adapter), 9W (open frame) at 230VAC ±15% and 4W (adapter), 6W (open frame) output power
• Reduce system cost, better cost/performance over RCC/linears, EcoSmart™ extremely energy efficient
• High performance at low cost, simple ON/OFF control, no loop compensation needed
• No load consumption <lt/>50mW with bias winding and <lt/>250mW without bias winding at 265VAC input
• Meets California Energy Commission (CEC), Energy Star and EU requirements
• Cost effective replacement for bulky regulated linears
• 132KHz operation reduces transformer size allows EF12.6 or EE13 cores for low cost, small size
• Fully integrated auto-restart for short circuit and open loop fault protection
• Lowest component count switcher solution, expanded scalable device family for low system cost
• Built-in circuitry practically eliminates audible noise with ordinary dip-varnished transformer