MP6500LGU-P

MP6500L is a stepper motor driver with current regulation and a built-in translator. Current sensing is internal and does not require external sense resistors. With high integration and a small package size, the MP6500L is a space-saving, cost-effective solution for bipolar stepper motor drives. The MP6500L operates from a supply voltage up to 35V and can deliver motor currents up to 2.5A based on PCB design and thermal conditions. The MP6500L can operate a bipolar stepper motor in full-, half-, quarter- or eighth step mode. Internal safety features include overcurrent protection (OCP), input overvoltage protection (OVP), undervoltage lockout (UVLO) and thermal shutdown. The MP6500L is available in a QFN-24 (5mmx5mm) package. Typically used in bipolar stepper motors and printers.

• Wide 4.5V to 35V input voltage range
• Two internal full-bridge drivers
• Internal current sensing and regulation
• Low on-resistance (195mohm HS-FET, 170mohm LS-FET)
• No control power supply required, simple logic interface
• 3.3V and 5V compatible logic supply
• Step modes from full step to eighth-step
• Automatic current decay
• Fault indication output

Notas

MPS part numbers ending in "-P" and "-Z" are the same parts. P & Z only indicates reel size.