Introduziu um valor nos campos em destaque abaixo que contém caracteres inválidos. Reveja a sua selecção utilizando apenas caracteres válidos.
Os produtos podem não ser uma correspondência exata da sua pesquisa
Você comprou anteriormente este produto.
Ver no Histórico de Pedidos
ATAB5279
LF Wake-up Demonstrator, Using Six-fold Antenna Driver, for PEG Systems
- Fabricante:
- MICROCHIP MICROCHIP
- Nº da peça do fabricante:
- ATAB5279
- Código Newark
- 68T1981
- Ficha técnica:
- ATAB5279 Ficha de dados
Informação do produto
Deseja ver produtos semelhantes? Você só tem de selecionar abaixo os atributos que pretende e clicar no botão ×
- :
- Atmel
- :
- AVR
- :
- megaAVR
- :
- ATA5279
- :
- ATmega
- :
- ATAB-LFMB-79 AVR Baseboards
- :
- Demonstration Board for ATA5279 Antenna Driver, Software CD, Power & USB Cable, LF Antenna Modules
- :
- -
Documentos técnicos (1)
Transferências de CAD
--Selecione por favor...
✔
--Selecione por favor...
×
Termos e Condições
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Descrição geral do produto
The ATA5279 is an LF coil driver IC intended for passive entry go (PEG) systems. It can drive up to six low-frequency antennas (coils) to provide a wake-up and initialization channel to the key fob. It drives up to 1A peak current on first 3 channels and up to 700mA peak current on the second 3, largely independent of battery voltage. A boost converter to stabilize the antenna current independently from the battery voltage as well as from antenna tolerances. ATA5279C LF driver, a widely used device for automotive car access applications. LF drivers will evolve to become a key PEPS device in response to the ever present need for integration and cost reduction while enabling new applications such as wireless power charging for mobile devices or connectivity through NFC with NFC enabled devices.
- Six connections for series-resonant LF coil antennas
- Drives up to 1A peak current on the first three channels and up to 700mA peak on the second three
- On-off-keyed data modulation with up to 5.7Kbit/s (manchester coded)
- Sinusoidal-like output signal for superior EMC behavior
- 20 selectable steps for current regulation for field strength measurement (RSSI)
- Output driver stages are protected against electrical and thermal overload
- Very low power down current consumption
- SPI interface for easy microcontroller bus connection
- LF data buffer to minimize microcontroller’s CPU load during a data transmission
Sucesso de vendas
US continental orders over $49 and under 50 pounds may qualify for free ground shipping. Click the link for the full Terms and Conditions of the offer.
0 Em estoque
Não cancelável/Não reembolsável
Devido às condições do mercado, os prazos de entrega são apenas para orientação geral e podem estar sujeitos a mudanças comunicadas com pouca antecedência.
Preço indisponível. Contacte os serviços de apoio ao cliente.
- Unidades por pacote
- Cada
Vários: 1 Mínimo: 1
Filtertool