MAX6642ATT92+T

MAX6642ATT92+T is a ±1°C, SMBus-compatible remote/local temperature sensor with an overtemperature alarm. It is a precise, two-channel digital temperature sensor that accurately measures the temperature of its own die and a remote PN junction and reports the temperature data over a 2-wire serial interface. The 2-wire serial interface accepts standard system management bus (SMBus™), write byte, read byte, send byte, and receive byte commands to read the temperature data and program the alarm thresholds. The active-low ALERT output asserts when the local or remote overtemperature thresholds are violated. A fault queue may be used to prevent the active-low ALERT output from setting until two consecutive faults have been detected. Measurements can be done autonomously or in a single-shot mode. Applications include desktop computers, notebook computers, servers, thin clients, test and measurement, workstations, graphic cards.

• Integrated temperature sensor enables simultaneous dual temperature (remote and local) measurements
• Remote temperature error is +1.0°C at TRJ=+60°C to +100°C, TA=+25°C to +85°C, VCC=3.3V
• Measures remote temperature up to +150°C
• Dual zone monitoring automates over-temperature alarms
• Programmable remote/local temperature thresholds, ALERT output
• Low thermal mass reduces measurement latency, SMBus/I2C address hardwired
• Supply voltage range from 3.0 to 5.5V
• Temperature resolution is 0.25°C typ at VCC=+3.3V and TA=+25°C
• 6 TDFN-EP package
• Temperature range from -40°C to +125°C

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party