MAX4588CAI+

The MAX4588CAI+ is a low voltage, high-isolation, dual 4-channel RF/video multiplexer in 28 pin SSOP package. The low voltage, dual 4-channel multiplexer is designed for RF and video signal processing at frequencies up to 180MHz in 50 ohm and 75ohm systems. A flexible digital interface allows control of on-chip functions through either a parallel interface or an SPI™/ MICROWIRE™ serial port. Each channel of the MAX4588 is designed using a “T” switch configuration, ensuring excellent high-frequency off-isolation. The MAX4588 has low on-resistance of 60 ohm max with an on-resistance match across all channels of 4ohm max. Additionally, on-resistance is flat across the specified signal range (2ohm max). The off leakage current is under 1nA at TA = +25°C and less than 10nA at TA = +85°C. It is used in RF switching automatic test equipment, video signal routing networking and high-speed data acquisition.

• 2.7V to +12V single supply, ±2.7V to ±6V dual supplies
• Low insertion loss of -2.5dB up to 100MHz
• High off-isolation of -74dB at 10MHz
• Low crosstalk of -70dB up to 10MHz
• 3dB bandwidth is 180MHz
• Low power consumption <lt/>20μW
• Rail to rail bidirectional signal handling
• Greater than ±2KV ESD Protection per method 3015.7
• TTL/CMOS compatible inputs with VL = +5V
• Automated Test Equipment (ATE); High-Speed Data Acquisition; Networking; RF Switching; Video Signal Routing

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party