MAX3089ECSD+

The MAX3089ECSD+ is a ±15KVESD protected, fail-safe, high speed RS485/RS422 transceiver in 14 pin NSOIC package. It contains one driver and one receiver. The device features fail-safe circuitry which has a logic high receiver output when the receiver inputs are open or shorted. This means that the receiver output will be logic high if all transmitters on a terminated bus are disabled (high impedance). MAX3089ECSD+ slew rate is selectable between 115Kbps, 500Kbps and 10Mbps by driving a selector pin with a single three-state driver. The transmitter output and receiver input is protected by ±15KV using human body model with enhanced ESD protection. This transceiver typically draws 375μA of supply current when unloaded or when fully loaded with the drivers disabled. It has a 1/8 unit load receiver input impedance that allows up to 256 transceivers on the bus.

• Supply voltage range from 4.75V to 5.25V
• Operating temperature range from 0°C to 70°C
• Selectable between half duplex and full duplex operation
• True fail-safe receiver while maintaining EIA/TIA485 compatibility
• 1nA low current shutdown mode
• Features receiver/driver enable function
• Phase controls to correct for twisted pair reversal

Aplicações

Communications & Networking, Industrial

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party