MAX13054ESA+

The MAX13054ESA+ is an industry standard high speed CAN transceiver with ±80V fault protection in 8 pin NSOIC package. This CAN transceiver provides a link between the CAN protocol controller and the physical wires of the bus lines in a CAN. The CAN transceiver provides a dominant timeout function that prevents erroneous CAN controller from clamping the bus to a dominant level if the transmitter input is held lower for greater than 1ms. The CAN transceiver have an input common mode range greater than ±12V, exceeding the ISO11898 specification of -2V to +7V and feature ±8KV ESD protection making device ideal for harsh industrial environments. It has a separate dedicated logic input, VCC2 allowing interfacing with a +3.3V microcontroller. The device is used for industrial network applications where overvoltage protection is required. It can be used for DeviceNet applications requiring data rates up to 1Mbps.

• Supply voltage range is 4.75V to 5.25V
• Operating temperature range from -40°C to 85°C
• Low current standby mode
• Short-circuit protection
• Thermal shutdown
• Current limiting

Aplicações

Communications & Networking, Power Management

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party