DS3502U+T&R

The DS3502U+T&R is a high voltage, non-volatile I²C potentiometer in 10 pin µSOP package. It is a 7bit digital potentiometer featuring an output voltage range of 15.5V. Programming is accomplished by an I²C compatible interface which can operate at speeds of up to 400KHz. External voltages are applied at the RL and RH inputs to define the lowest and highest potentiometer outputs.

• Supply voltage range is 2.5V to 5.5V
• Operating temperature range from -40°C to 100°C
• Single linear taper potentiometer
• 128 wiper tap points
• Address pins allow four DS3502 devices to share the same I²C bus
• End to end resistance is 10Kohm at ±20% tolerance and temperature coefficient is 4ppm/°C
• Instrumentation and Industrial Controls; Mechanical POT Replacement; TFT-LCD VCOM Calibration

Aplicações

Signal Processing, Automation & Process Control

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party