AD5696RBRUZ

AD5696R is a low power, quad, 16bit buffered voltage output DAC. It operates from a single 2.7V to 5.5V supply, are guaranteed monotonic by design, and exhibit less than 0.1% FSR gain error and 1.5mV offset error performance. It incorporates a power on reset circuit and a RSTSEL pin that ensures that the DAC outputs power upto zero scale or midscale and remain there until a valid write takes place. Each part contains a per-channel power-down feature that reduces the current consumption of the device to 4µA at 3V while in power-down mode. It uses a versatile 2-wire serial interface that operates at clock rates up to 400KHz, and includes a VLOGIC pin intended for 1.8V/3V/5V logic. It is widely used in application such as optical transceivers, base-station power amplifiers, process control (PLC I/O cards), industrial automation, data acquisition systems etc.

• Accuracy is ±8LSB INL
• Reference tempco is ±5ppm/°C typ
• Offset error is +0.1mV typ at (VDD = 2.7V to 5.5V)
• Gain error is ±0.02% of FSR typ at (VDD = 2.7V to 5.5V)
• Total unadjusted error is ±0.01% of FSR typ at (VDD = 2.7V to 5.5V)
• User selectable gain of 1 or 2 (GAIN pin)
• Reset to zero scale or midscale (RSTSEL pin)
• Low glitch is 0.5nV-sec typ
• Slew rate is 0.8V/µs typ, output noise is 6µV p-p (0.1Hz to 10Hz)
• Operating temperature is -40°C to +105°C, package style is 16-lead TSSOP

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party