ATS480D62Y

ATS480D62Y is a Altistart 480 soft starter. It is intended to start and stop asynchronous motors supplied from 208V to 690V. It meets requirements of the most demanding applications in normal and heavy duty. With an operational rated current of 62A in normal duty, it supplies motor from 15KW to 45KW according to mains voltage. Designed for digitization, connected, optimized to meet cybersecurity standard, it simplifies project execution and maximizes the availability of applications. It efficiently stops high inertia application thanks to the dynamic braking and DC injection. It could be connected in-line or inside the delta to reduce its operational current. The embedded test routine simplifies the commissioning inside the delta. ATS480 is compatible with ATS48, it has same footprint, fixing, torque control algorithm, I/O, menus. It is designed to address process, infrastructures and industrial machines.

• Conforms to IEC/EN60947-4-1, certified by cULus, UKCA, CCC, RCM, EAC, marine DNV, ABS, BV and CCS
• Power supply frequency range from 50 to 60Hz (-20 to 20%)
• IP20 degree of protection
• Class 10E motor thermal protection class
• Minimum switching current is 10mA at 24VDC for relay outputs
• Modbus serial communication port protocol, 1 RJ45 connector type
• 8bits, configurable odd, even or no parity data format
• Vertical +/- 10degree operating position
• 11.41inch height, 7.48inch width, 9.72inch depth
• Ambient air temperature for operation range from -15 to 40°C (without derating)