ULINKPRO-D

ULINKPRO-D is a debug and trace unit that connects PC's USB port to your target system (via a JTAG, Cortex Debug, or Cortex Debug+ETM connector). It allows you to program, debug, and analyze your applications using its unique streaming trace technology. The ULINKpro D Debug Unit has the same high debug performance, but does not support ETM Instruction Trace. ULINKpro D together with MDK-ARM, provides extended on-the-fly debug capabilities for Cortex-M devices. You are able to control the processor, set breakpoints, and read/write memory contents, all while the processor is running at full speed. High-Speed data and instruction trace are streamed directly to your PC enabling you to analyze detailed program behavior.

• ULINKpro D support is available in MDK 4.73 or higher
• Supports ARM7, ARM9, Cortex-M0, Cortex-M1, Cortex-M3, and Cortex-M4 devices
• JTAG support for ARM7, ARM9, and Cortex-M, SWD support for Cortex-M
• Serial Wire Viewer (SWV) data and event trace for Cortex-M up to 100Mbit/s (Manchester mode)
• Unique streaming trace direct to your PC, provides unlimited trace buffer
• JTAG clock speed up to 50MHz, supports Cortex-M devices running at up to 200MHz
• High-speed memory read/write up to 1MBytes/sec, seamless integration w/ Keil µVision IDE & debugger
• Voltage range: 1.2V - 3.3V, 5V tolerant and support for 5V only devices using optional 5V adapter
• USB 2.0 high-speed connection and USB powered (no power supply required)
• Target CONN: 10-pin (0.05") - Cortex debug connector and 20-pin (0.05") - Cortex Debug+ETM connector