DS18B20+PAR

The DS18B20+PAR is a 1-Wire parasite power digital thermometer in 3 pin TO-92 package. This device provides 9 to 12bit centigrade temperature measurements and has an alarm function with nonvolatile user programmable upper and lower trigger points. The DS18B20+PAR do not need an external power supply because it derives power directly from data line (parasite power). It communicates over 1-Wire bus which by definition requires only one data line (and ground) for communication with a central microprocessor. Each DS18B20+PAR has a unique 64bit identification code which allows multiple DS18B20+PAR to function on same 1-wire bus thus it is simple to use one microprocessor to control many DS18B20+PAR distributed over a large area.

• Multidrop capability simplifies distributed temperature sensing applications
• ±0.5°C accuracy from -10°C to 85°C
• Converts temperature to 12bit digital word in 750ms (maximum)
• User definable non volatile temperature alarm settings
• Alarm search command identifies and addresses devices whose temperature is outside of limits
• Software compatible with DS1822-PAR
• pull-up supply voltage range from 3V to 5.5V
• Operating temperature range from -55°C to 100°C

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party