AD5780ACPZ

AD5780 is a system ready, 18bit, unbuffered voltage output digital-to-analog converter (DAC). The part uses a versatile 3-wire serial interface that operates at clock rates of up to 35MHz and is compatible with standard serial peripheral interface (SPI), QSPI™, MICROWIRE™, and DSP interface standards. The part incorporates a power-on reset circuit that ensures that the DAC output powers up to 0V in a known output impedance state and remains in this state until a valid write to the device takes place. The part provides an output clamp feature that places the output in a defined load state. Typical applications are medical instrumentation, test and measurement, industrial control, scientific and aerospace instrumentation, data acquisition systems, digital gain and offset adjustment, power supply control.

• Integrated precision reference buffers, 1.8V-compatible digital interface
• 35MHz schmitt triggered digital interface
• Output noise spectral density is 8nV/√Hz typical (at 1KHz, DAC code=midscale)
• Gain error temperature coefficient is ±0.018ppm/°C typ (VREFP=+10V, VREFN=−10V)
• Output voltage settling time is 2.5µs typical (10V step to 0.02%)
• Midscale glitch impulse is 14nV-sec typ (VREFP=+10V, VREFN=−10V)
• Wide power supply range of up to ±16.5V
• Digital feedthrough is 0.27nV-sec typ (VDD=12.5V to 16.5V, VSS=−16.5V to −12.5V)
• 24-lead frame chip scale package [LFCSP]
• Temperature rating range from -40°C to +125°C

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party