AP13192USLK

The AP13192USLK is a RF transceiver student learning kit featuring the MC13192 family. The MC13192 is a short range, low power, 2.4GHz Industrial, Scientific, and Medical (ISM) band transceivers. The MC13192 contain a complete 802.15.4 standard physical layer (PHY) modem designed for the 802.15.4 standard which supports peer to peer, star, and mesh networking. The MC13192 includes the 802.15.4 PHY/MAC for use with the HCS08 Family of MCUs. When combined with an appropriate microcontroller (MCU), the MC13192 provides a cost effective solution for short range data links and networks. Interface with the MCU is accomplished using a four wire serial peripheral interface (SPI) connection and an interrupt request output which allows for the use of a variety of processors. The software and processor can be scaled to fit applications ranging from simple point to point systems, through complete ZigBee networking.

• On board antenna
• 250Kbps RF data rate
• Low operating power of 60ma with transmit enabled
• Three power saving modes
• Full spread spectrum encode and decode
• 16 RF channels with 5MHz of separation
• Transmit and receive data buffers for low MCU overhead
• Packet or stream data transfer modes
• Compatible pin connection with application modules and the MCUSLK development board