MKW01Z128CHN

The MKW01Z128CHN is a 32-bit Kinetis ultra low power Wireless Microcontroller based on ARM Cortex-M0+ RISC architecture core. The device is highly-integrated, smart radio, sub-1GHz wireless node solution composed of a transceiver supporting FSK, GFSK, MSK or OOK modulations with a low-power ARM Cortex M0+ CPU. The highly integrated RF transceiver operates over a wide frequency range including 315MHz, 433MHz, 470MHz, 868MHz, 915MHz, 928MHz and 955MHz in the license-free industrial, scientific and medical (ISM) frequency bands. This configuration allows users to minimize the use of external components. The device incorporates 128kB internal flash, 16kB internal RAM, one 16-bit SAR A/D converter, one 12-bit D/A converter and 27 general-purpose I/O pins. This device also features communication interfaces like three UART modules, one SPI module and two I2C modules.

• Programmable bit rate up to 600kbps (FSK)
• High Sensitivity - down to -120dBm at 1.2kbps
• High selectivity - 16-tap FIR channel filter
• 48MHz Maximum CPU frequency
• 24MHz Maximum Bus frequency
• Vectored interrupt controller (NVIC)
• Asynchronous wake-up interrupt controller (AWIC)
• 4-channel Direct memory access (DMA)
• DMA request multiplex
• Non maskable interrupt (NMI)
• COP watchdog
• Low leakage wake-up unit (LLWU)
• Debug and trace
• 80-bit wide ID number
• 48MHz External square wave input clock - DC
• Phase locked loop (PLL) with up to 100MHz VCO
• Frequency locked loop (FLL)
• Power management controller (PMC) with low voltage warning (LVW)
• 1 High speed comparator (HSCMP) with internal 6-bit digital to analog converters (DAC)
• One 12-bit DAC with DMA support and 2 word data buffer
• 6-channel Timer/PWM (TPM)
• Periodic interrupt timers
• 16-bit Low-power timer (LPTMR)
• Real-time clock 32-bit timer
• Touch sensor inputs (TSI)

Applications

Metering, Wireless, Sensing & Instrumentation, Building Automation, Security, Automation & Process Control, Industrial