ATMEL  ATSTK600-SC01  Accessory Type:Socket Card

Technical Data Sheet (233.41KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Product Overview

ATSTK600-SC01 is a generic STK600 socket card for devices in DIP package up to 40 pin. The Socket card requires a Routing card and a STK600 motherboard to support the selected device. The AVR device connects to the STK600 using an innovative routing and socket card sandwich system. Socket cards route each pin from the IC socket to separate pins on the spring loaded connectors on the bottom side, facing the routing card. The system consists of a generic socket card, on which the AVR device is inserted and a device specific signal routing card, which routes the signals from the socket pins to the different functions on the STK600 main board dependant on the device.
  • Generic STK600 socket card for devices in DIP package up to 40 pin
  • Low cost solution to support upcoming devices as the socket is the cost driving factor
  • Supports for some of the AVR-based Microcontroller, megaAVR, tinyAVR MCU devices
  • Require routing card and a STK600 motherboard to support the selected device


Product Information

Accessory Type:
Socket Card
For Use With:
STK600 Starter Kit and Development System
Product Range:
Low Cost Solution to Support Upcoming Devices as the Socket is the Cost Driving Factor
No SVHC (15-Jun-2015)

Find similar products  grouped by common attribute


  • Automation & Process Control;
  • Automotive;
  • Building Automation;
  • Communications & Networking;
  • Consumer Electronics;
  • Industrial;
  • Lighting;
  • Portable Devices;
  • Motor Drive & Control;
  • Sensing & Instrumentation

Legislation and Environmental

Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.