AT91SAM9X25-EK

The AT91SAM9X25-EK is an evaluation kit that enables the evaluation and code development of applications running on a SAM9X25 device. The SAM9X25 is a High performance ARM926-based embedded microprocessor unit, running at 400MHz and featuring multiple networking/connectivity peripherals, optimized for industrial applications such as building automation, gateways and medical. The SAM9X25 features two 2.0A/B compatible controller area network (CAN) interfaces and two IEEE Std 802.3 compatible 10/100Mbps Ethernet MACs. Additional communication interfaces include a soft modem supporting exclusively the conexant SmartDAA line driver, HS USB device and host, FS USB host, two HS SDCard/SDIO/MMC interfaces, USARTs, SPIs, I2S,TWIs and 10bit ADC.

• Consists of SAM9X25 400MHz CPU external memory DDR2-SDRAM (1Gb) NAND flash (2 or 4Gb)
• Three USB ports and two high speed SD/MMC interfaces
• HS (EHCI) and FS (OHCI) host, multiplexed with HS USB device via micro AB connector
• HS (EHCI) and FS (OHCI) host, via standard type A connector
• FS only (OHCI) host, via standard type A connector
• Two Ethernet 10/100 interfaces with On board MAC controllers and RJ45 sockets
• One stereo CODEC interface with line-in and headphone jacks
• Two CAN interfaces and three serial interfaces (2x USART, 1x UART)
• One telephone/modem interface with RJ11 connector
• One Two Wire Interface (TWI) and one ZigBee extension port

Applications

Industrial, Building Automation, Medical, Automation & Process Control, Communications & Networking, Metering

Contents

One EK board with SAM9X25-CM CPU module, universal power supply with US, Europe and UKplug adapters, one 3V Lithium battery CR1225, one serial RS232 cable, one micro A/Btype USB cable, one RJ45 crossed cable.

Warnings

The board must not be subjected to high electrostatic potentials. In risky ESD environments a grounding strap or similar protective device should be worn when handling the board.

Notes

One optional display module.