Low

AD8495CRMZ - 

Temperature Sensor IC, Analogue, ± 1°C, -40 °C, +125 °C, MSOP, 8 Pins

ANALOG DEVICES AD8495CRMZ

The actual product may differ from image shown

Manufacturer Part No:
AD8495CRMZ
Newark Part No.:
85R6448
Product Range
AD8495 Series
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
-
:
Each
:
Analogue
:
+125°C
:
8Pins
:
± 1°C
:
-40°C
:
2.7V
:
AD8495 Series
:
36V
:
MSOP
:
MSL 1 - Unlimited
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The AD8495CRMZ is a 0 to 50°C Precision Thermocouple Amplifier with cold junction compensators on an integrated circuit. It produce a high level (5mV/°C) output directly from a thermocouple signal by combining an ice point reference with a pre-calibrated amplifier. It can be used as standalone thermometers or as switched output setpoint controllers using either a fixed or remote setpoint control. This can be powered from a single-ended supply (<3V) and can measure temperatures below 0°C by offsetting the reference input. To minimize self heating, an unloaded AD8495 typically operates with a total supply current of 180μA, but it is also capable of delivering in excess of ±5mA to a load. This amplifier is laser trimmed to match the characteristics of K type (chromel-alumel) thermocouples. The AD8495 works with 3V supplies allowing them to interface directly to lower supply ADCs.
  • Easy to use
  • Pretrimmed for K type thermocouples
  • Internal cold junction compensation
  • High impedance differential input
  • Standalone 5mV/°C thermometer
  • Reference pin allows offset adjustment
  • Thermocouple break detection
  • <1mW Power at VS = 5V

Applications

Test & Measurement, Sensing & Instrumentation

Warnings

ESD sensitive device, take proper precaution while handling the device.

Substitutes

Associated Products

Compare Selected