ALS-CAT6JT

ALS-CAT6JT is a HyperLink wireless brand weatherproof 10/100/1000 Base-T high power CAT6 lightning and surge protector. The unit has low line to line and line to ground capacitance to minimize distortion of high-speed signals. The design provides protection for both common and differential mode surges. This unit features a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. This device supports PoE mode A and B for power. The ALS-CAT6JT shielded RJ45 jacks are isolated from the safety ground. This minimizes the chance of a ground loop being introduced. PG16 cable glands are provided on the enclosure as well as an external ground clamp to provide a tie point for earth ground. The PG16 cable glands are large enough to pass an un-booted RJ45 connector through so pre-terminated cables can be used. Typical applications are wireless access points and bridges, wireless client adapters, IP cameras.

• Reliable differential gas tube protection
• Cable shield isolated from safety ground
• IEEE 802.11af/at Power-Over-Ethernet (PoE) compatible
• Weatherproof ABS enclosure with gasketed cover and shielded RJ45 jacks
• Dark gray ABS enclosure
• 10AWG maximum ground lug
• (2) shielded RJ45 jacks Ethernet connectors
• Line – ground is 90volt, line – line is 90volt clamping voltage
• Operating temperature range from -40°C to +80°C
• Dimension (W x H x L) is 4.72 x 3.15 x 2.18inch

Avisos

This product can expose you to chemicals including phthalates, which is known to the State of California to cause cancer and birth defects or other reproductive harm.