ADUM3070ARQZ

ADUM3070 is a regulated dc-to-dc isolated power supply controller with an internal MOSFET driver. The dc-to-dc controller has an internal isolated PWM feedback from the secondary side based on the iCoupler® chip scale transformer technology and complete loop compensation. This eliminates the need to use an optocoupler for feedback and compensates the loop for stability. It provides a more stable output voltage and higher efficiency compared to unregulated isolated dc-to-dc power supplies. The fully integrated feedback and loop compensation provides a smaller form factor than any discrete solution. The regulated feedback provides a relatively flat efficiency curve over the full output power range. It is used in applications such as power supply start-up bias and gate drives, isolated sensor interfaces, process controls.

• Isolated PWM feedback with built in compensation
• Regulated adjustable output from 3.3V to 24V
• Upto 80% efficiency, thermal shutdown
• Soft start function at power-up, 2500V rms isolation
• Pulse-by-pulse overcurrent protection
• Output ripple is 50mV p-p typ at (20MHz bandwidth, COUT = 0.1µF / 47µF, IISO = 100mA)
• Output noise is 100mV p-p typ at (20MHz bandwidth, COUT = 0.1µF / 47µF, IISO = 100mA)
• Switching frequency is 1000MHz typ at (ROC = 50Kohm, TA = 25°C)
• Operating temperature is -40°C to +105°C
• Package style is 16-lead QSOP

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party