G9SX-NS202-RT DC24

The G9SX-NS202-RT DC24 is a Safety Relay with screw terminals. The G9SX-NS safety relay is designed for non-contact door switch operation. This controller support logical AND connections that enable partial stops. This controller makes the most of D40A switches. The indicators show the location and cause of wiring errors and any other errors that are detected. Auxiliary outputs for errors also contribute to reducing down time.

• 2 Instantaneous safety outputs
• 2 Auxiliary outputs
• 24VDC Rated supply voltage
• 3W Maximum rated power consumption
• 100ms Maximum operating time
• 15ms Maximum response time
• 3.0V Maximum (safety output, auxiliary output) ON-state residual voltage
• 0.1mA Maximum (safety output, auxiliary output) OFF-state leakage current
• 20MΩ at 100VDC Minimum insulation resistance
• 500VAC for 1 minute Dielectric strength

Applications

Safety

Warnings

Serious injury may possibly occur due to loss of required safety functions. Wire the D40A & G9SX-NS properly so that supply voltages or voltages for loads do not touch the safety outputs accidentally.