N2818A

N2818A is a 200MHZ differential probe with AutoProbe interface which provides the superior general-purpose differential signal measurements required for today’s high-speed power measurements, vehicle bus measurements and digital system design. The N2818A differential probe offers 10:1 attenuation setting, allowing it to be used for a broad range of applications. The probe comes with a pair of alligator clips and hook tip clips for use with large and small components in tight places. The differential probe has an input resistance of 1Mohm and low input capacitance of 3.5 pF to minimize circuit loading. The N2818A probe is compatible with select InfiniiVision and Infiniium oscilloscopes with 50 Ω AutoProbe interface input. The probe is powered directly by the InfiniiVision and Infiniium AutoProbe interface. For use with non-AutoProbe input oscilloscope, use the N2792A.

• Bandwidth is 200MHz, Probe Rise time (10% - 90%) is 1.75nsec
• Operating temperature range from –10 to 40 °C
• Direct connection to AutoProbe interface(no power supply is required)
• Ideal for high-speed power measurements, digital differential buses, vehicle serial buses
• Wide dynamic range for various applications: ±20V differential, ±60V common mode
• High input resistance and low input capacitance for low probe loading: 1Mohm//3.5pF between inputs
• Compatible oscilloscopes N2792A/93A: any oscilloscope with 50 ohm BNC input
• Housing dimension (LxWxH) is 4.4 x 0.9 x 0.6inch
• Regulatory markings CEI/IEC61010-031 CAT II

Contents

200MHZ differential probe, 2 hook clips (black and red), 2 alligator clips (black and red), 1 screw driver for offset adjustment.