E4362A

E4362A is a 600W solar array simulator DC power module that simulates the output characteristics of a solar array. The E4361A is primarily a current source with very low output capacitance. It offers fast I-V curve changes allowing you to accurately simulate the output of different solar arrays under various environmental conditions (e.g., temperature, age, eclipse, spin). The E4360 gives you the flexibility to operate it in two ways: input the four key operational parameters (Voc, Isc, Vmp, Imp) needed for the SAS to internally create an I-V curve of a solar array download a user-defined table for the I-V curve of the solar array. This module works with the Keysight E4360A modular Solar Array Simulator (SAS) mainframe, which can hold up to two modules and save rack space with its 2U high size. LAN, USB, and GPIB interfaces are standard.

• 130V, 5A, 600W output rating (simulator and table modes)
• 130V, 5A, 600W output rating (simulator and table modes)
• Programming accuracy voltage (fixed mode): 0.075% + 25mV, current (fixed mode): 0.2% + 20mA
• Voltage RMS, p-p (simulator/table mode): 24mVrms, 195mV p-p (ripple & noise (20Hz to 20MHz))