FLUKE-700PMP

The FLUKE-700PMP is a tube type, cylindrical shaped precision pressure Hand Pump with a T handle at the compressor end and a round knob at the volume adjust end. The overall length is between 11.5-inch (full extension) and 8.5-inch (fully collapsed). The pump incorporates a needle valve for venting and volume adjusts vernier for precision adjustment of pressure. Pressure connections are made through one 1/8-inch NPT internally threaded fitting. The pump is small in size, lightweight and ruggedly constructed to withstand typical field use. External equipment should also be checked carefully for leaks. Process connections, flange bolts and vents must be tightly closed. Defective gaskets, leaking valves and damaged diaphragms are all potential sources of leaks. For detection of very small system leaks, the traditional soap bubble method may not be sufficient. Halogen leak detection devices may be required with using highly sensitive pressure calibration equipment.

• Set the FINE ADJUST knob to the full counter clockwise position
• Turn the bleed valve knob fully clockwise to close
• Acetal body and piston
• Buna-N O-rings
• Brass or nickel-plated brass other wetted parts
• 145psig/10bar Pressure range

Applications

Industrial

Warnings

It is imperative that all system pressure is relieved prior to making any connections or disconnections. Failure to relieve system pressure could result in serious personal injury or equipment damage.