Ha introducido un valor en los campos resaltados a continuación que contiene caracteres no válidos. Revise su selección utilizando sólo caracteres válidos.
Es probable que el producto no se corresponda exactamente con su búsqueda
Ya compró este producto antes.
Ver en Historial de pedidos
CWMPCEVB5200BE
Tarjeta de Evaluación, MCU MPC5200B, Conector USB, MPC5200B, USB 1.1, CAN Doble, Ethernet
La imagen solo tiene fines ilustrativos. Consulte la descripción del producto.
- Fabricante:
- NXP NXP
- No. Parte Fabricante:
- CWMPCEVB5200BE
- No. Parte Newark
- 01M5523
- Rango de productos
- Serie MPC500
- Hoja de datos técnicos:
- CWMPCEVB5200BE Ficha de datos
Selector de rango de producto (Serie MPC500)
Vea todos los productos de esta gamaInformación del producto
¿Quiere ver productos similares? Simplemente seleccione los atributos requeridos y presione el botón ×
- :
- NXP
- :
- 32bit
- :
- MPC5xx
- :
- Power Architecture
- :
- Power Architecture
- :
- MPC5xxx
- :
- EVB Lite5200, CD, Fuente de Alimentación, cable, software
- :
- Serie MPC500
Documentos técnicos (2)
Descarga de CAD
--Seleccione...
✔
--Seleccione...
×
Términos y condiciones
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Resumen del producto
The CWMPCEVB5200BE evaluation board provides developers with a cost effective method to evaluate the power of the 400MHz MPC5200B. The MPC5200B processor includes support for DDR memory, a second PCI slot and expanded Flash and SDRAM memory. The board makes Ethernet, USB, PCI, ATA, serial interfaces, CAN and GPIO with complete DDR, SDRAM and flash memory support available. The I²C, I²S, SPI, J1850, AC97 and secondary port facilities, as well as all other resources of the MPC5200B, are accessible via an on board connector and user supplied transceivers. Because nearly all of the MPC5200B's I/O pins are reprogrammable, various combinations of I/O may be traded off, depending on the user's specific needs.
- Power architecture processor core with double precision FPU, hardware MMU and BestComm DMA
- 760 Dhrystone 2.1MIPS for plenty of application headroom and upgradeability
- MPC5200B processor operates at just one watt at 400MHz in typical applications
- Peripheral serial controller (PSC1) with transceiver
- Single USB 1.1 (master only compatibility)
- Dual CAN 2.0A/B
- 10/100 Base-T Ethernet
- I²C (to 520kbps) for EEPROM (also available on two connectors)
- Version 4 5V ATA (compact flash with true IDE mode); supports Ultra33
- Two PCI interfaces with standard PC-type connectors
Aplicaciones
Comunicaciones y Red, Automoción, Industrial
US continental orders over $49 and under 50 pounds may qualify for free ground shipping. Click the link for the full Terms and Conditions of the offer.
0 En inventario
No cancelable / No retornable
Debido a las condiciones del mercado, los tiempos de entrega son únicamente orientativos y pueden estar sujetos a cambios con poco tiempo de aviso.
El precio no está disponible. Por favor Contacte con Servicio al cliente.
- Precio para:
- Cada
Múltiple: 1 Mínimo: 1
Herramienta de filtro