You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Product may not be an exact match for your search
You previously purchased this product.
View in Order History
DEVKIT1207
Evaluation Board, 3.5 LCD with Touch Screen, USB, Ethernet, JTAG
- Manufacturer:
- EMBEST EMBEST
- Manufacturer Part No:
- DEVKIT1207
- Newark Part No.:
- 77T2812
- Technical Datasheet:
- DEVKIT1207 Datasheet
Product Information
Want to see similar products? Simply select your required attributes below and hit the button ×
- :
- STMicroelectronics
- :
- 32bit
- :
- STM32F2xx
- :
- ARM
- :
- Cortex-M3
- :
- STM32
- :
- Evaluation Board, 3.5 LCD with Touch Screen, Cross Serial Cable, Cross Net Cable, USB Cable, CD
- :
- -
Technical Documents (5)
CAD Downloads
--Please select...
✔
--Please select...
×
Terms and Conditions
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Product Overview
DEVKIT1207 evaluation kit is a complete development platform for STM32F207IGT6 devices which enables engineers to easily and rapidly evaluate, prototype and test designs built around the STMicroelectronics STM32F207xx series microcontrollers. The STM32F207IGT6 flash microcontroller is based on the high performance ARM Cortex-M3 32bit RISC core operating at a frequency of up to 120MHz. The DevKit1207 board has on board 2Kbits EEPROM and exposed a full range of hardware peripherals to support HS/FS USB OTG, Ethernet, CAN, Serial port, IrDA, TF card, LCD, Touch screen, Camera, Audio, G-sensor, RTC, JTAG, etc. The kit is also provided with an industrial level 3.5 inch LCD with resistive touch screen and all other necessary accessories to help user observe the testing result and use the platform more conveniently. Board is ported with uC/OS-II and FreeRTOS real time operating systems and the software also features the GUI support on uC/OS-II and LwIP_v1.3.2 protocol support on FreeRTOS.
- 120MHz STM32F207IGT6 ARM Cortex-M3 32bit Flash microcontroller
- CPU Internal 1MBytes of Flash and 128KB (system) +4KB (backup) of SRAM
- USB2.0 OTG full speed port and USB2.0 OTG high speed port
- 3.5inch TFT LCD and 4 wire resistive touch screen
- 10/100 Ethernet with IEEE 1588v2, CAN2.0B, serial Port, IrDA, TF, Audio, JTAG
- G-sensor 3 axis acceleration sensor
- Optional 1.3megapixel digital camera module
- Supports for uC/OS-II and FreeRTOS Real time operating systems
- Supports UCGUI
- v3.90a
- Supports fatFs
- vR0.08a file system
Applications
Communications & Networking, Audio, Motor Drive & Control, Medical, Industrial, Consumer Electronics, Security
Contents
Board, 3.5inch LCD with touch screen, Power adapter, Cables, CD.
US continental orders over $49 and under 50 pounds may qualify for free ground shipping. Click the link for the full Terms and Conditions of the offer.
0 In stock
Non-Cancelable / Non Returnable
Due to market conditions delivery times are for general guidance only and may be subject to change at short notice
Filter Tool