471-043

471-043 is a Ettus USRP B210: 2x2, 70MHz-6GHz SDR/cognitive radio with enclosure kit. The USRP B210 provides a fully integrated, single-board, universal software radio peripheral platform with continuous frequency coverage from 70MHz to 6GHz. Designed for low-cost experimentation, it combines the AD9361 RFIC direct-conversion transceiver providing up to 56MHz of real-time bandwidth, an open and reprogrammable Spartan-6 FPGA, and fast SuperSpeed USB 3.0 connectivity. Full support for the USRP Hardware Driver™ (UHD) software allows you to immediately begin developing with GNU Radio, prototype your own GSM base station with OpenBTS, and seamless transition code from the USRP B210 to higher performance, industry-ready USRP platforms. An enclosure accessory kit is available to users of green PCB devices (revision 6 or later) to assemble a protective steel case.

• Xilinx Spartan-6 XC6SLX75 FPGA
• Channels: 2 TX & 2 RX, half or full duplex
• Instantaneous bandwidth up to 56MHz in 1x1, up to 30.72MHz in 2x2
• IIP3 (at typical NF): 0.20dBm, power output: >10dBm, receive noise figure: <8dB
• DC Input: 6V (DC power supply included)
• Grounded mounting holes
• USB 3.0 SuperSpeed interface, standard USB 3.0 connector, GPIO capability
• 10MHz clock reference, PPS time reference
• Dimension is 97 x 155 x 15mm
• Operating temperature range from 0 to 45°C

Contents

USRP B210 board, USRP enclosure kit, USB 3.0 cable, Universal power supply.