MAXM17532EVKIT#

The MAXM17532EVKIT# is an evaluation kit (EV kit) for MAXM17532. It is a demonstration circuit of the MAXM17532 42V, 100mA ultra-small, high efficiency, current mode, synchronous step-down DC-DC switching power module. The EV kit operates over a wide input-voltage of 10V to 42V and provides up to 100mA load current with a 5V output voltage. It is programmed to switch at a frequency of 600KHz. The module is simple to use and easily configurable with minimal external components. It features cycle by cycle peak current-limit protection, undervoltage lockout (EN/UVLO) and thermal shutdown. The EV kit comes with the compact 10 pin 2.6mm x 3mm x 1.5mm micro-SLIC package MAXM17532 module installed and is rated to operate over the full industrial/ automotive -40°C to +125°C temperature range. Typically used at 4mA to 20mA current-loop powered sensors, high-voltage LDO replacement, industrial sensors, motor encoder, HVAC and building control.

• ±1.75% feedback voltage accuracy
• Internally compensated
• All ceramic capacitors and ultra-compact solution
• Fixed-frequency PWM
• Shutdown current as low as 1.2µA (typ)
• Programmable soft-start and prebias start-up
• Open-drain power good output (active-low RESET pin)
• Programmable EN/UVLO threshold
• Hiccup overcurrent protection (OCP)
• Overtemperature protection (OTP)

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party