MAX3535EEWI+
RS422/RS485 Transceiver, Full Duplex, 1 Mbps, 1 Transmitter, 5.5 V Supply, -40 to 85 °C, WSOIC-28

| Manufacturer | ANALOG DEVICES |
|---|---|
| Manufacturer Part No | MAX3535EEWI+Copy |
| Manufacturer Standard Lead Time | 12 weeks |
| Newark Part No. | 47AC3907 |
| Your Part Number | |
| Technical Datasheet |
Need more?
| Quantity | Price |
|---|---|
| 1+ | $29.170 |
| 5+ | $26.360 |
| 10+ | $23.540 |
| 25+ | $22.130 |
| 50+ | $21.360 |
| 100+ | $20.590 |
Product Information
| Manufacturer | ANALOG DEVICES |
|---|---|
| Manufacturer Part No | MAX3535EEWI+Copy |
| Manufacturer Standard Lead Time | 12 weeks |
| Newark Part No. | 47AC3907 |
| Technical Datasheet | |
| Device Type | Transceiver |
| IC Type | RS422 / RS485 Transceiver |
| IC Interface Type | RS422, RS485 |
| No. of Receivers | 1Receivers |
| No. of Drivers | 1Drivers |
| No. of Transmitters | 1 |
| Communication Mode | Full Duplex |
| Data Rate Max | 1Mbps |
| Supply Voltage Min | 3V |
| Supply Voltage Max | 5.5V |
| Driver Case Style | SOIC |
| IC Case / Package | WSOIC |
| No. of Pins | 28Pins |
| No. of Nodes | 256 |
| ESD Protection | ±15 kV (HBM) |
| Fail Safe | Open, Short |
| Operating Temperature Min | -40°C |
| Operating Temperature Max | 85°C |
| Product Range | - |
| Qualification | - |
| MSL | MSL 1 - Unlimited |
| IC Generic Number | MAX3535E |
| SVHC | No SVHC (04-Feb-2026) |
Product Overview
MAX3535EEWI+ is an isolated RS-485/RS-422 full duplex transceiver in a 28 pin WSOIC package. It provides 2500VRMS of galvanic isolation between the RS-485/RS-422 side and the processor or control logic side. This device allows fast, 1000kbps communication across an isolation barrier when the common-mode voltages (i.e., the ground potentials) on either side of the barrier are subject to large differences. Isolation is achieved through integrated high-voltage capacitors. The MAX3535E also features a 420kHz transformer driver that allows power transfer to the RS-485 side using an external transformer. MAX3535E includes one differential driver, one receiver, and internal circuitry to send the RS-485 signals and control signals across the isolation barrier (including the isolation capacitors). The MAX3535E RS-485 receiver is 1/8 unit load, allowing up to 256 devices on the same bus.
- 2500VRMS RS-485 bus isolation using on-chip high-voltage capacitors
- 1000kbps full-duplex RS-485/RS-422 communication
- Power-supply voltage range +3V to +5.5V
- ±15kV ESD protection using HBM
- Pin-selectable slew-rate limiting controls EMI
- Hot-swap-protected driver-enable input
- Undervoltage lockout, isolation-barrier fault detection
- Short-circuit protected, thermal shutdown
- Open-line and shorted-line fail-safe receiver inputs
- Temperature range from -40°C to +85°C
Technical Specifications
| Device Type | Transceiver |
|---|---|
| IC Interface Type | RS422, RS485 |
| No. of Drivers | 1Drivers |
| Communication Mode | Full Duplex |
| Supply Voltage Min | 3V |
| Driver Case Style | SOIC |
| No. of Pins | 28Pins |
| ESD Protection | ±15 kV (HBM) |
| Operating Temperature Min | -40°C |
| Product Range | - |
| MSL | MSL 1 - Unlimited |
| SVHC | No SVHC (04-Feb-2026) |
| IC Type | RS422 / RS485 Transceiver |
|---|---|
| No. of Receivers | 1Receivers |
| No. of Transmitters | 1 |
| Data Rate Max | 1Mbps |
| Supply Voltage Max | 5.5V |
| IC Case / Package | WSOIC |
| No. of Nodes | 256 |
| Fail Safe | Open, Short |
| Operating Temperature Max | 85°C |
| Qualification | - |
| IC Generic Number | MAX3535E |
Technical Docs (1)
Alternatives for MAX3535EEWI+
3 Products Found
Associated Products
6 Products Found
Legislation and Environmental
| US ECCN: | EAR99 |
|---|---|
| EU ECCN: | Unknown |
| RoHS Compliant: | Yes RoHS |
| RoHS Phthalates Compliant: | Yes RoHS |
| SVHC: | No SVHC (04-Feb-2026) |
| Download Product Compliance Certificate | Product Compliance Certificate |
