
Need more?
| Quantity | Price |
|---|---|
| 1+ | $72.790 |
| 5+ | $66.580 |
| 10+ | $60.360 |
| 25+ | $57.260 |
| 50+ | $55.560 |
| 100+ | $53.850 |
Product Information
Product Overview
LTC2358HLX-16#PBF is a 16-bit, low noise 8-channel simultaneous sampling successive approximation register (SAR) ADC with buffered differential, wide common mode range picoamp inputs. Operating from a 5V low voltage supply, flexible high voltage supplies, and using the internal reference and buffer, each channel of this SoftSpan™ ADC can be independently configured on a conversion-by-conversion basis to accept ±10.24V, 0V to 10.24V, ±5.12V, or 0V to 5.12V signals. Individual channels may also be disabled to increase throughput on the remaining channels. The integrated picoamp-input analogue buffers, wide input common mode range and 128dB CMRR of the LTC2358-16 allow the ADC to directly digitize a variety of signals using minimal board space and power. The LTC2358-16 supports pin-selectable SPI CMOS (1.8V to 5V) and LVDS serial interfaces. Between one and eight lanes of data output may be employed in CMOS mode, allowing the user to optimize bus width and throughput.
- 200ksps per channel throughput
- Eight buffered simultaneous sampling channels
- 500pA/12nA max input leakage at 85°C/125°C
- Features ±1LSB INL, no missing codes at 16 bits, and 94.2dB SNR
- −111dB THD (typical) at fIN = 2kHz
- Rail-to-rail input overdrive tolerance
- Integrated reference and buffer (4.096V)
- Internal conversion clock, no cycle latency
- 219mW power dissipation (27mW/Ch typical)
- 48-lead (7mm x 7mm) LQFP package
Technical Specifications
SAR
200kSPS
Differential
7.5V
LQFP
Surface Mount
125°C
-
16bit
8Channels
SPI
38V
48Pins
-40°C
Octal 16-Bit SAR ADCs
To Be Advised
Technical Docs (1)
Legislation and Environmental
RoHS
RoHS
Product Compliance Certificate
