786T-500-D2

786T-500-D2 is a low frequency, Class I Div 2 dual-output accelerometer and temperature sensor. This dual-output sensor measures both vibration and temperature, providing more data from one sensor to simplify your condition monitoring setup. This dual-output sensor is useful in applications where users want to know the temperature at the mounting locations. Temperature is measured by an integrated circuit chip that produces a DC output voltage signal. The signal changes by 10 millivolts per degree Celsius. A one degree Celsius change infers a 10mV voltage difference where the reference temperature 0° Celsius.

• Certified for use in Class I Division 2 and Zone 2 hazardous areas
• Senses both acceleration and temperature, clear signals at low vibration levels
• Ideal for slow-speed machinery, rugged design, hermetic seal, ESD protection
• Manufactured in ISO 9001 facility, 500mV/g sensitivity at (±5%, 25°C)
• 10g peak acceleration range at (VDC <gt/> 22V), hermetic sealing
• 1% amplitude nonlinearity, ±3dB frequency response from 0.2 to 14,000Hz
• 30KHz resonance frequency, 300 ohm maximum output impedance
• Voltage source range from 18 to 30VDC, current regulating diode range from 2 to 10mA
• 12VDC nominal bias output voltage, vibration limit is 500g peak
• Operating temperature range from -50°C to +120°C

Contents

Dual-output accelerometer and temperature sensor, 1/4-28 mounting stud, SF6 mounting stud (metric mounting available), Calibration data (level 2).