
| Manufacturer | STMICROELECTRONICS |
|---|---|
| Manufacturer Part No | L9301-TRCopy |
| Manufacturer Standard Lead Time | 19 weeks |
| Newark Part No. | Re-Reel60AK8375RL Cut Tape60AK8375 |
| Your Part Number | |
| Technical Datasheet |
Need more?
| Packaging Type | Quantity | Unit Price: | Total |
|---|---|---|---|
| Cut Tape | 1 | $7.300 | $7.30 |
| Total Price | $7.30 | ||
| Quantity | Price |
|---|---|
| 1+ | $7.300 |
| 10+ | $5.730 |
| 100+ | $4.830 |
| 500+ | $4.480 |
| 1000+ | $4.010 |
| 2500+ | $3.920 |
| 10000+ | $3.840 |
Product Information
| Manufacturer | STMICROELECTRONICS |
|---|---|
| Manufacturer Part No | L9301-TRCopy |
| Manufacturer Standard Lead Time | 19 weeks |
| Newark Part No. | Re-Reel60AK8375RL Cut Tape60AK8375 |
| Technical Datasheet | |
| Power Load Switch Type | High Side, Low Side |
| No. of Channels | 8Channels |
| Input Voltage | 5.25V |
| Current Limit | - |
| On State Resistance | 0.6ohm |
| IC Case / Package | PowerSSO |
| No. of Pins | 36Pins |
| Thermal Protection | Yes |
| On / Enable Input Polarity | Active Low |
| No. of Outputs | 8Outputs |
| Operating Temperature Min | -40°C |
| Operating Temperature Max | 125°C |
| Qualification | AEC-Q100 |
| Product Range | - |
| SVHC | Lead (21-Jan-2025) |
| Automotive Qualification Standard | AEC-Q100 |
| Distribution Switch Case Style | PowerSSO |
Product Overview
L9301-TR is an automotive octal low side driver or quad low side plus quad high side. It is a SPI controlled octal channel with 4 high/low and 4 low side drivers with the possibility to use four integrated PowerMOS as recirculation diodes for PWM load driving. L9301 contains 12 PowerMOS: 4 configurable High/Low side drivers with Ronmax = 0.6 Ω (DRN1-4, SRC1-4), 4 low side drivers with Ronmax = 0.6 Ω (OUT1-4) and 4 low side drivers with Ronmax = 0.3 Ω (OUT5-8). The power DRN/SRC1-4 and OUT1-4 can be connected in parallel outside the device in ordered to get 4 low-side drivers with Ronmax = 0.3 Ω: DRN1//DRN2, DRN3//DRN4, OUT1//OUT2, OUT3//OUT4. The above configuration can be driven by parallel input or SPI command. Through the SPI it is possible to configure the device parameters like configuration, Slew-rate, Overcurrent threshold, to send the drivers commands and to read back the diagnosis results.
- AEC-Q100 qualified
- Operating battery supply voltage 5V to 18V, logic inputs TTL/CMOS-compatible
- Operating Vdd supply voltage 4.75V to 5.25V
- Output voltage clamping 37V typical in low-side configuration
- SPI interface for outputs control and for diagnosis data communication
- Additional PWM inputs for 8 outputs, overtemperature protection
- Open load, short to GND, short to VB, controlled SR for improved EMC behavior
- Overcurrent diagnostics in latched or unlatched mode for each channel
- PowerSSO36 package
- Operating ambient temperature range from -40 to 125°C
Technical Specifications
| Power Load Switch Type | High Side, Low Side |
|---|---|
| Input Voltage | 5.25V |
| On State Resistance | 0.6ohm |
| No. of Pins | 36Pins |
| On / Enable Input Polarity | Active Low |
| Operating Temperature Min | -40°C |
| Qualification | AEC-Q100 |
| SVHC | Lead (21-Jan-2025) |
| Distribution Switch Case Style | PowerSSO |
| No. of Channels | 8Channels |
|---|---|
| Current Limit | - |
| IC Case / Package | PowerSSO |
| Thermal Protection | Yes |
| No. of Outputs | 8Outputs |
| Operating Temperature Max | 125°C |
| Product Range | - |
| Automotive Qualification Standard | AEC-Q100 |
Technical Docs (2)
Legislation and Environmental
| US ECCN: | Unknown |
|---|---|
| EU ECCN: | Unknown |
| RoHS Compliant: | Y-Ex RoHS |
| RoHS Phthalates Compliant: | Yes RoHS |
| SVHC: | Lead (21-Jan-2025) |
| Download Product Compliance Certificate | Product Compliance Certificate |
