33-12931

HDMI Wireless Matrix Extender - Receiver only This HDMI wireless receiver unit can be used with the Wireless Matrix Extender Kit (33-12930) to add a second receiver to your wireless HDMI matrix extender configuration. The wireless matrix extender not only supports point to point configurations, but also supports one to many (1 to 2) and many to many (2 to 2, 2 to 1) configurations (note: if using 2 transmitters, they must be located more than 300ft apart to eliminate signal interference between the transmitters). This receiver features IR pass-back (frequency ranging 20~60KHz) for remote control of source devices from the receiver side. With both panel button control and IR control, channel setting easy. Excellent solution for simultaneously transmitting one or more HDMI source signals to one or more screens over a long distance without running wires. Perfect for applications like conference rooms, home entertainment and education. Wireless Matrix Extender Kit: Here

• Smart, small-footprint design
• Resolutions up to 1080p full HD.
• Strong anti-interference, 5.8GHz operating frequency
• Supports point to point configuration; (1 to 2, 2 to 1, or 2 to 2) configuration.
• Support IR passback with 20-60KHz frequency.
• Supports button control to set channels, and IR contoller to switch and choose input sources from receiver side.
• 160ft transmission range
• HDMI compliance: HDMI 1.3
• HDCP compliance: HDCP 1.2
• HDMI resolution supported: 480i@60Hz, 480P@60hz, 576i@60hz, 576p@60hz, 720p@50/60hz, 1080i@50/60hz, 1080P@60hz
• Supported audio formats: L/R Stereo Audio
• Maximum transfer rate: 10.2Gbps
• IR remote control: IR passback within 20-60KHz frequency range
• Wireless transmission method: 5.8G Wireless transmission
• Wireless transmission distance: 160ft
• Latency: =200 ms
• Power Supply: DC5V/2A (included)
• Power Consumption: TX