MAX5541ESA+

The MAX5541ESA+ is a low-cost, +5V, serial-input, voltage-output, 16bit DAC in 8 pin NSOIC package. The DAC output is unbuffered, resulting in a low 0.3mA supply current and low 1LSB offset error. The DAC output range is 0V to VREF. The DAC latch accepts a 16bit serial word. A power-on reset (POR) circuit clears the DAC output to 0V (unipolar mode) when power is initially applied. The 10MHz 3-wire serial interface is SPI/QSPI/ MICROWIRE compatible and interfaces directly with optocouplers for applications requiring isolation. Typical applications include high-resolution offset and gain adjustment, industrial process control, automated test equipment and data acquisition systems.

• Supply voltage range is 4.75V to 5.25V
• Operating temperature range from -40°C to 85°C
• Accuracy is ±0.5bits DNL and ±4LSB INL
• Low power dissipation of 1.5mW
• Settling time is 1μs
• Unbuffered voltage output directly drives 60Kohm loads
• Schmitt trigger inputs for direct optocoupler

Aplicações

Signal Processing, Industrial

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party