410-346-20

410-346-20 is an Arty Z7: Zynq-7000 SoC development board designed with versatility and flexibility in mind. With universally popular Arduino™ headers and multiple Pmod™ ports, an Arty will be the most adaptable FPGA/SoC board in your toolbox. The Arty Z7 is a ready-to-use development platform designed around the AMD Zynq®-7000 System-on-a-chip (SoC) family. The Zynq®-7000 SoC family integrates the software programmability of an ARM®-based processor with the hardware programmability of an FPGA, enabling key analytics and hardware acceleration while integrating CPU, DSP, ASSP, and mixed signal functionality on a single device. The Arty Z7 is supported by AMD's Vivado Design Suite, including the free WebPACK version. The SDSoC™ development environment provides a familiar embedded C/C++/OpenCL application development experience for heterogeneous Zynq® SoC deployment.

• Arty Z7-20 features larger XC7Z020-1CLG400C and 85000 logic cells, 220 DSP slices, 4.9Mbit block RAM
• ZYNQ processor: 650MHz dual-core Cortex-A9 processor
• DDR3 memory controller with 8 DMA channels and 4 high performance AXI3 server ports
• High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO
• Low-bandwidth controller: SPI, UART, CAN, I2C and programmable logic equivalent to Artix-7 FPGA
• Memory: 512MB DDR3 with a 16-bit bus at 525MHz (1050MT/s)
• Power: powered from USB or any 7V-15V external power source
• USB and Ethernet: Gigabit Ethernet PHY, USB-JTAG programming circuitry, USB-UART bridge
• Audio and video: HDMI sink port(I/P), HDMI source port(O/P), PWM driven mono audio O/P w/ 3.5mm jack
• Switches, Push-buttons, and LEDs: 4 push-buttons, 2 slide switches, 4 LEDs, 2 RGB LEDs

Contents

Arty Z7: SoC development board (Receive a free USB A to Micro-B cable with your Arty Z7 purchase (Must have the USB cable and Arty Z7 in your cart for the discount)), Digilent cardboard packaging with protective foam.