MIT410/2

The MIT410/2 from Megger is a MIT400 series CAT IV insulation tester with polarisation index (PI) and dielectric absorption ratio (DAR) functions. It is designed not only for electrical and industrial testing but also for exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance. Insulation testing has been enhanced with feedback controlled test voltages to limit overvoltage to 2% rather than the industry standard 10-20%. It has redesigned weatherproof tough housing, back stand and 6 cell battery compartment with separate fuse access. The dimensions of instrument is 108mm x 228mm x 63mm (W x D x H) and weight is 600g. It operates -10°C to +55°C temperature and has humidity of 90% RH at 40°C maximum. It includes all the features required for electricians and engineers working in a range of industries. Features are selected to make testing easy and fast in a range of situations.

• 50V, 100V, 250V, 500V and 1000V insulation test voltage
• Stabilised insulation test voltage, live circuit detection and protection
• Single range, faster continuity testing from 0.01ohm to 1Mohm
• 600V TRMS AC and DC voltage measurement, 0.25Mohm input impedance
• Test inhibit, insulation buzzer, test lock, lead null and buzzer
• CAT IV 600V / CAT III 1000V & IP54 rated, meets international requirements of IEC61010 and EN61557
• Auto power down (setup), auto reverse polarity (setup ON-OFF), 15Hz to 400Hz frequency measurement
• 2% test voltage accuracy, pass/fail indication, test voltage, measurement range and voltage display
• Display offers a combination of analogue arc and dual digital readout
• Insulation testing up to 200Gohm at 1000V

Applications

Test & Measurement

Contents

MIT410/2 insulation tester, Red/black silicone test leads, SP5 remote switch probe, Information CD, Batteries 6 x AA alkaline, Hard carry case.