DET4TD2

DET4TD2 is a digital ground tester. The ground tester has been designed to be easy to use, a large selector switch makes selection of 2 pole, 3 pole or 4 pole test easy with gloved hands and the design makes the fitting of shorting links to perform 2 pole tests a thing of the past. A large, clear, easy to read LCD display and thumb sized test button again makes the instrument particularly suited to the outdoor conditions of ground testing. In addition to this ease of use the ground tester also automatically checks the connection and condition of the P spike and the C spike, indicating the status on the display. The instrument also includes a voltmeter to allow you to measure the ground voltage. The ground tester can measure resistance from 0.01ohm through to 20Kohm and earth voltages up to 100V. To allow testing in noisy environments the instrument is capable of rejecting noise of up to 40V peak to peak.

• IP54 ingress protection
• 2, 3 and 4 point testing
• Simple one button operation
• 8 off AA (LR6) cells battery type
• Robust carry case
• Delivered with calibration certificate
• Instrument output: ±25V or ±50V voltage at 128Hz and 4.5mA or 0.45mA current
• 3 1⁄2 high contrast liquid crystal display
• Safety complies with the requirements of IEC61010-1 100V CAT IV between terminal pairs
• Dimension is 203 x 148 x 78mm (8 x 5.8 x 3inch)

Contents

Digital ground tester, Test leads, Stakes, Terminal adaptors for bare wire, Batteries, Calibration certificate delivered in a tough polypropylene carry case.