LFXP2-5E-5MN132I

LFXP2-5E-5MN132I is a look-up table (LUT) based FPGA fabric with non-volatile flash cells in an architecture referred to as flexiFLASH. The flexiFLASH approach provides benefits including instant-on, infinite reconfigurability, on chip storage with FlashBAK embedded block memory and Serial TAG memory and design security. The parts also support Live Update technology with TransFR, 128-bit AES Encryption and Dual-boot technologies. The LatticeXP2 FPGA fabric was optimized for the new technology from the outset with high performance and low cost in mind. LatticeXP2 devices include LUT-based logic, distributed and embedded memory, phase locked loops (PLLs), pre-engineered source synchronous I/O support and enhanced sysDSP blocks. Synthesis library support for LatticeXP2 is available for popular logic synthesis tools. The diamond software uses the synthesis tool output along with the constraints from its floor planning tools to place and route the design in the LatticeXP2 device.

• 5k logic capacity, 1.2V supply voltage, slowest speed
• Instant-on, infinitely reconfigurable, single chip
• FlashBAK™ technology, serial TAG memory, design security
• TransFR™ technology, secure updates with 128 bit AES encryption, dual-boot with external SPI
• Three to eight blocks for high performance multiply and accumulate
• 12 to 32 18x18 multipliers
• Each block supports one 36x36 multiplier or four 18x18 or eight 9x9 multipliers
• Up to four analog PLLs per device, clock multiply, divide and phase shifting
• LVCMOS 33/25/18/15/12; LVTTL, SSTL 33/25/18 class I, II
• 132 lead csBGA package, industrial operation junction temperature range from -40 to 100°C