IS25LP040E-JNLE

IS25LP040E-JNLE is a 4Mb serial flash memory with 104MHz multi I/O SPI and QPI interface. It offers a versatile storage solution with high flexibility and performance in a simplified pin count package. ISSI’s “Industry Standard Serial Interface” flash is for systems that require limited space, a low pin count, and low power consumption. The device is accessed through a 4-wire SPI interface consisting of a serial data input (SI), serial data output (SO), serial clock (SCK), and chip enable (CE#) pins, which can also be configured to serve as multi-I/O. The device supports dual and quad I/O as well as standard, dual output, and quad output SPI. Clock frequencies of up to 104MHz allow for equivalent clock rates of up to 416MHz (104MHz x 4) which equates to 52Mbytes/s of data throughput. The uniform sector and block architecture allows for a high degree of flexibility so that the device can be utilized for a broad variety of applications requiring solid data retention.

• 256bytes per programmable page, supports standard SPI, multi-I/O SPI, and QPI
• High performance serial flash (SPI), 50MHz normal and 104MHz fast read, 416MHz equivalent QPI
• Flexible and efficient memory architecture, chip erase with uniform sector/block erase(4/32/64Kbyte)
• Efficient read and program modes, XIP read operation, dual I/O and quad IO read with AX mode
• Single voltage supply is 2.30V to 3.60V
• 6mA active read current, 17µA standby current, 3µA deep power down
• Advanced security protection, software and hardware write protection, power supply lock protect
• 8-pin SOIC 150mil package
• Extended grade ambient operating temperature range from -40°C to 105°C
• VCC power supply is 3.0V typical