GDS-1102-U

The GDS-1102-U from GW Instek is a GDS-1000-U series 100MHz, 2-channel, digital storage oscilloscope. This easy to use oscilloscope provides a unique solution and operates at 100MHz with a real time sampling rate of 250MSa/s and Equivalent smaling rate of 25GSa/s, giving users a more flexible option to process incoming signals. Coupled with the high resolution 5.7” colour TFT display with user-friendly interface USB device and host port make the GDS-1000A-U series feature rich. It features a 2mV/div to 10V/div vertical sensitivity, 1Mohm input impedance and 100V to 240V AC power source.

• Math Function: Add, Subtract, FFT
• Fast horizontal position mark and search
• Auto measurement gating, flexible probe factor setting
• GO/NOGO function, PC remote control software, datalogger
• FFT/FFTrms and zoom FFT measurement
• 250MSa/s real time sample rates maximum, 25GSa/s equivalent time
• Observation expand by ground/centre observation-delay on/ off
• 4k points per channel record length, 2mV to 10V vertical scale, 1ns to 50s horizontal range
• Up to 19 automatic measurements, auto/normal trigger
• Digital storage counter function, zoom FFT, cursor readout, auto-set

Applications

Test & Measurement

Contents

GDS-1102 digital storage oscilloscope, User manual, Power cord, GTP-100A-4 100MHz (10:1/1:1) switchable passive probe.

Warnings

The power supply voltage should not fluctuate more than 10%.

Notes

Make sure the BNC input voltage does not exceed 300V peak.