BC190/820

The BC190/820 from Fluke is an universal mains power adapter. It is used for measurement, control and laboratory equipment. The BC190/820 is intended for operating and charging the Fluke 190 series ScopeMeter test tool. The mains power adapter is based on the switched mode concept for high efficiency and low stand-by power consumption. It has 600V CAT IV according IEC/EN 61010-1 safety approval for measurement, control and laboratory use. The BC190/820 also has EMC compatibility of EN 61326-1, FCC (47 CFR 15).

• Operates in a wide range of input voltages from 100VAC up to 240VAC nominal
• Suitable for most types of mains outlets
• Nominal input voltage from 100VAC to 240VAC, ±10%
• Input current of 0.35A at maximum load, nominal input frequency of 50/60Hz ±10%
• IEC 60320-1 type C14 mains inlet
• 18VDC ±5% output voltage, 0mA to 840mA output current, 2m (6.5ft) output cable length
• 5mm outer diameter, per DIN45232 output connector
• Dimensions of main unit is 79mm x 149mm x 49mm, housing material is heat resistant ABS
• Colour (housing and cable) is black, weight is 0.35Kg, IP rating is IEC 60529:IP40
• Operating temperature range from 0°C to 50°C

Contents

BC190/820 switch mode power adapter (main unit) with DC cable, Mains cord with fixed power plug or universal mains cord with male and female connector.

Notes

Always fully charge the instrument battery before storing the test tool.