Ha introducido un valor en los campos resaltados a continuación que contiene caracteres no válidos. Revise su selección utilizando sólo caracteres válidos.
Es probable que el producto no se corresponda exactamente con su búsqueda
Ya compró este producto antes.
Ver en Historial de pedidos
55264
Filamento de Impresora 3D, 2.85mm Diá., Amarillo, PLA, 200 a 220 °C, 1 kg
La imagen solo tiene fines ilustrativos. Consulte la descripción del producto.
- Fabricante:
- VERBATIM VERBATIM
- No. Parte Fabricante:
- 55264
- No. Parte Newark
- 44AC4204
- Hoja de datos técnicos:
- 55264 Datasheet
Información del producto
¿Quiere ver productos similares? Simplemente seleccione los atributos requeridos y presione el botón ×
- :
- 3mm
- :
- Amarillo
- :
- PLA (Ácido Poliláctico)
- :
- 220°C
- :
- 200°C
- :
- 72mm
- :
- 1kg
- :
- 220°C
- :
- 102mm
Documentos técnicos (1)
Descarga de CAD
--Seleccione...
✔
--Seleccione...
×
Términos y condiciones
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Resumen del producto
The 55264 from Verbatim is a yellow colour, 3mm diameter PLA 3D filament. It is manufactured to very tight tolerances (±0.05mm diameter) using the highest quality materials to ensure consistent feeding and stable prints. Filament is packaged in vacuum sealed bag with desiccant to prevent introduction of dust and moisture. This filament can be cut, filed or glued post printing (do not use with acetone). It is compatible with most commercially available non-cartridge based 3D printers. The filament is environmentally friendly and guaranteed not to contain heavy metals, phthalates (BPA free).
- 2.90 ± 0.05mm diameter tolerance, 200 to 220°C process temperature
- Net weight is 2.20lbs (1Kg), gross weight is 3.00lbs (1.36Kg)
- Spool diameter is 20.00cm (7.87inch), spool depth is 7.20cm (2.83inch)
- Hub diameter is 10.20cm (4.02inch), hub hole diameter is 5.10cm (2.01inch)
- Designed for strength and uniform feeding, ensures top quality prints every time
- PLA (Polylactic Acid) filament for use with 3D printers, degradable bioplastic derived from plants
- Easier to print, less prone to warping than other filament materials
- For best performance, an extrusion temperature between 200 to 220°C
- Heated build platform not required
Notas al pie
Keep material in sealed bag until ready for use and store unused material in cool, dark place.
US continental orders over $49 and under 50 pounds may qualify for free ground shipping. Click the link for the full Terms and Conditions of the offer.
No está disponible
$47.99
El precio no está disponible. Por favor Contacte con Servicio al cliente.
- Precio para:
- Cada
Múltiple: 3 Mínimo: 3
| Cantidad | Precio | Su precio |
|---|---|---|
| 1+ | $47.99 |
Precio promocional
Precio de contrato
Precio exclusivo de la web
Precio de contrato exclusivo de la web
|
El precio no está disponible. Por favor Contacte con Servicio al cliente.
Precio total:
Precio total: ( )
Precio total: --
Herramienta de filtro