DIN1P-20-250-1G-15

The Stabiline DIN1 Plus series Surge Protective Device delivers worry-free performance with an innovative and proven technology design. This models provide surge protection against harmful transient voltage and high-frequency noise that exceed the nominal operating voltage of AC and DC critical dedicated control loads. The DIN1 PLUS series unit is installed/connected in either Series or Parallel with the line and the equipment to be protected. The DIN1 PLUS contains no line/load sensitive components and therefore can be connected in any orientation. The DIN1 PLUS series units respond reliably and repeatedly in less than 1 nanosecond. The fail-safe design incorporates thermal fuse links and TMOVs and dual Component-Level Fusing (CLF) is standard in each unit. All models include an LED to visually indicate that protection is active. Units are self-contained in rugged plastic enclosures and employ twenty millimetre (20mm) MOVs as their key suppression elements.

• DIN-rail mounting or wall mount tabs
• 10 or 20kA Surge amp capacity protection per mode for DC use
• 20 or 40kA Surge amp capacity protection per mode for AC use
• 15 and 30A models – Maximum continuous operating current
• Ø1, 2-wire plus ground, 24, 48, 120 and 250V models
• Ultra compact, fail-safe design
• High-frequency noise filtering
• Hard-wired via screw terminals
• LED visual protection status

Aplicaciones

Safety, Industrial, Administración de Potencia, Seguridad, Automatización y Control de Procesos, Calibración, Monitorización de Sistemas, Imagen, Vídeo y Visión