L9963T-TR

L9963T-TR is a general-purpose SPI to isolated SPI transceiver intended to create a communication bridge between devices located in different voltage domains. It is able to transfer communication data incoming from a classical 4-wire-based SPI interface to a 2-wire isolated interface (and vice versa). The transceiver supports both transformer and capacitive isolation since the isolated signal generated according to a proprietary protocol is suitable to be transmitted over both decoupling circuitries. This device can be configured either as a server or as host of the SPI bus and supports any protocol made of SPI frames 8 to 64bit long. The transceiver manages the transfer of the information without performing any protocol check. It is used in applications such as automotive: 48V and high-voltage systems, backup energy storage systems and UPS, industrial communication networks, portable and semi-portable equipment, and remote sensors.

• AEC-Q100 qualified, full ISO26262 compliant, ASIL-D systems ready
• Compatible with both 3.3V and 5V logics, supports both XFMR and capacitive isolation
• Low standby current, input hysteresis is 0.4V maximum
• Internal redundant oscillator frequency is 16MHz typical
• 10MHz SPI peripheral for SPI operation
• Configurable SPI frequency (250KHz to 8MHz) for SPI operation
• Isolated communication rate is 333.3Kbps typical at (ISOFREQ = 0)
• Isolated communication rate is 2.66Mbps typical at (ISOFREQ = 0)
• Operating temperature range from -40°C to 105°C
• SO16N package