SX1250IMLTRT
Transceptor RF, 150 a 960 MHz, FSK, Salida 22 dBm, 3 a 3.6V, QFN-EP-24
¿Necesita más?
| Tipo de embalaje | Cantidad | Precio unitario: | Total |
|---|---|---|---|
| Cinta adhesiva | 1 | $4.600 | $4.60 |
| Total Precio | $4.60 | ||
| Cantidad | Precio | Precio promocional |
|---|---|---|
| 1+ | $9.620 | $4.600 |
| 25+ | $7.910 | $4.600 |
| 50+ | $7.600 | $4.600 |
| 100+ | $7.300 | $4.600 |
| 250+ | $6.940 | $4.600 |
| 500+ | $6.680 | $4.600 |
| 1000+ | $6.520 | $4.600 |
Información del producto
Resumen del producto
SX1250IMLTRT is a multi-band sub-GHz RF front end. It is designed to work along with Semtech’s SX1302 baseband engine, to design a high-performing LoRa® or LoRaWAN gateway. It covers any frequency band below 1GHz, making it the perfect candidate to support any license-free band used in today’s IOT use cases. The device supports up to +22dBm output power on-chip. This embedded high-power capability can be leveraged to reduce the bill of material cost when designing a gateway. As far as receiver, the Noise Figure of the system is also extremely low, eliminating the need for an external high-end and power-consuming Low Noise amplifier, if the goal is to come up with a cheaper and median-spec gateway. Application includes LoRa® and LoRaWAN gateways.
- Europe 868MHz, India 866MHz
- North America 915MHz, APAC 920MHz
- Asia 923MHz, lower UHF bands 169 and 433 or 490MHz
- Supply voltage, applies to VBAT-RF and VBAT-DIO range from 3 to 3.6V
- 20pF maximum load capacitance on digital ports
- 0dBm maximum RF input power
- 10:1 voltage standing wave ratio maximum
- 32MHz crystal oscillator frequency typical
- 100µW drive level maximum
- QFN 24 package, temperature range from -40 to 85°C
Especificaciones técnicas
150
960
FSK
3.6
QFN-EP
24Pines
960
118
22
-
To Be Advised
Transceptor
3
-
8
QFN-EP
150
-40
85
-
LoRa and LoRaWAN Gateways
Documentos técnicos (2)
Legislación y medioambiente
RoHS
RoHS
Certificado de conformidad del producto