MAX1299CEAE+

The MAX1299CEAE+ is a 12bit serial output temperature sensor with 5-channel ADC in 16 pin SSOP package. The implement local and remote temperature sensing with 12bit resolution. Accuracy is ±1°C from 0 to +70°C with no calibration needed. The device features an algorithmic switched-capacitor ADC, an on-chip clock and a 3-wire serial interface compatible with SPI, QSPI™ and MICROWIRE®. It also performs fully differential voltage measurements with 12bit resolution and separate track and hold for positive and negative inputs. Both devices accept versatile input modes consisting of two 3-channel signal pairs, five 1 channel signals relative to an AIN5 or VDD/4 relative to ground. An external reference may be used for more accurate voltage measurements. A shutdown mode and two standby modes provide multiple strategies for prolonging battery life in portable applications that require limited sampling throughput.

• Supply voltage range from +2.7V to +3.6V
• Local and remote temperature sensing
• Fully differential inputs
• Internal precision voltage reference of 1.20V
• INL and DNL is ±1LSB
• Typical power consumption is only 1.3mW
• Offset error is ±2LSB, offset temperature coefficient is ±10μV/°C, gain error is ±4LSB
• Conversion time is 1.1ms(voltage measurement), 2.2ms(temperature measurement)
• Track/hold acquisition time is 16μs, aperture delay is 30ns, internal clock frequency is 62.3KHz
• Operating temperature range from -40°C to +85°C
• Handheld Instruments (PDAs, Palmtops); Industrial Process Controls; Medical Equipment

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party