C0603X221J1HACAUTO
Capacitor Cerámico Multicapa SMT, 220 pF, 100 V, 0603 [1608 Métrico], ± 5%, X8R
![KEMET C0603X221J1HACAUTO Capacitor Cerámico Multicapa SMT, 220 pF, 100 V, 0603 [1608 Métrico], ± 5%, X8R](https://www.newark.com/productimages/standard/en_US/96Y6846-40.jpg)
¿Necesita más?
| Tipo de embalaje | Cantidad | Precio unitario: | Total |
|---|---|---|---|
| Re-reeling (Rollos a medida) | 1 | $0.122 | $0.12 |
| Total Precio | $0.12 | ||
| Cantidad | Precio |
|---|---|
| 1+ | $0.122 |
| 25+ | $0.051 |
| 100+ | $0.045 |
| 250+ | $0.040 |
| 500+ | $0.034 |
| 1000+ | $0.031 |
| 2500+ | $0.028 |
| 5000+ | $0.024 |
Información del producto
Resumen del producto
KEMET’s Flexible Termination (FT-CAP) Multilayer Ceramic Capacitor in Ultra-Stable X8R dielectric incorporates a unique, flexible termination system that is integrated with KEMET’s standard termination materials. A conductive silver epoxy is utilized between the base metal and nickel barrier layers of KEMET’s standard termination system in order to establish pliability, while maintaining terminal strength, solderability and electrical performance. This technology was developed in order to address the primary failure mode of MLCCs– flex cracks, which are typically the result of excessive tensile and shear stresses produced during board flexure and thermal cycling. Flexible termination technology inhibits the transfer of board stress to the rigid ceramic body, therefore mitigating flex cracks which can result in low IR or short circuit failures.
- Superior flex performance (up to 5 mm)
- Extremely low ESR and ESL
- High thermal stability
- High ripple current capability
- No capacitance change with respect to applied rated DC voltage
- AEC-Q200 qualified
Legislación y medioambiente
RoHS
RoHS
Certificado de conformidad del producto
