MAX483CSA+T

The MAX483CSA+T is a low power, slew rate limited RS485/RS422 transceiver in 8 pin NSOIC package. It contains one driver and one receiver. This reduced slew rate driver minimizes EMI and reduces reflections caused by improperly terminated cables, thus allowing error free data transmission up to 250Kbps. The driver is short circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high impedance state. It features fail-safe circuitry which has a logic high receiver output when the receiver input is open.

• Supply voltage range from 4.75V to 5.25V
• Operating temperature range from 0°C to 70°C
• Designed for half duplex communication
• Low current shutdown mode consume 0.1μA current
• Features receiver/driver enable function
• Quiescent current is 120μA
• Allows up to 32 transceivers on the bus

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party